View SP10-10NS-301B_4943976.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PASSIVE DELAY LINES, TAPPED, SIP PACKAGE
RESISTORS CAPACITORS COILS DELAY LINES
SP05 SERIES - 7 PIN, 5 TAP SP10 SERIES - 14 PIN, 10 TAP
Low cost, prompt delivery! Wide variety of values, 5nS to 750nS Fast rise times Detailed application handbook available
Term.W is RoHS compliant
RoHS
RCD's SP05 and SP10 passive delay line series are a lumped constant design per applicable portions of MIL-D-23859. The units incorporate high performance inductors and multi-layer capacitors, ensuring stable transmission, low temperature coefficient, and excellent environmental performance in space-saving SIP design.
Total Delay Tolerance 5% or 0.5nS (whichever is greater) Tap Delay Tolerance 5% or 0.5nS (whichever is greater) Temperature Coefficient 100ppm/C Max. Insulation Resistance 1000M min. Dielectric Strength 100V D C Distortion 10% Max. Operating Temp. Range 0 to70C (Opt.39= -40 to 85C, ER= -55 to125C) Operating Freq. (BW) BW (MHz)=.35/(TR nS x 1000) SP05= 2-5%, SP10=2.5-4% @50, Attenuation: (dependent on impedance, low values have 5-8% @100, 5-10% @200, 5-15% @300, 7-20% @ 500 lower attenuation)
OPTIONS
Custom circuits available Non-standard delay times & impedance values Tighter tolerance or temperature coefficient Faster rise times MIL-D-23859 screening Increased operating temperature range
TYPE SP05 (Available 5nS to 100nS)
.015 [.38] .100 [2.54] Min.
1
TYPE SP10
.250 [6.35] Max.
(Available 10nS to 750nS)
1.465 [37.2] Max.
.800 [20.3] Max.
.200 [5.08] Max.
.375 [9.53] Max. .100 [2.54]
.215 [5.46]
2
3
4
5
6
7
.024 [.6]
(IN) 2 (GND) 1
.600 [15.2]
.100 [2.54]
.03 [.77] .100 [2.54] Min.
1
2
3
4
5
6
7
8
9 10 11 12 13 14
.024 [.6] 1.3 [33.0]
4 5 6 7 8 9 10 11 12 13 (OUT) 14 (GND)
345 6
7 (OUT) 1 (GND)
(IN) 3 (GND) 1
TYPE SP05, 7 PIN 5 TAPS
Total Delay, TD (nS) 5 10 20 25 30 40 50 60 70 75 80 90 100 Max. Rise Time, TR (nS) 2.0 3.3 6.0 7.8 9.0 12 15 18 22 23 24 27 28 Delay per TAP (nS) 1.0 .3 2.0 .4 4.0 .6 5.0 1 6.0 1 8 1.5 10 1.8 12 2 14 2 15 3 16 3 18 3 20 3 Available Impedance Values (10% ) 50, 100 50, 100 50, 100 50, 100 50, 100 50, 100 50, 100 50 50 50 50 50 50
TYPE SP10, 14 PIN 10 TAPS
Total Delay, TD (nS) 10 20 30 40 50 60 75 100 120 150 200 250 300 500 600 750 Max. Rise Time, TR (nS) 3 5.5 6.5 8 10 12 15 20 24 30 40 50 60 100 120 150 Delay per TAP (nS) 1.0 .5 2.0 .75 3.0 1 4.0 2 5.0 2 6.0 2 7.5 2 10 2 12 2 15 2 20 2 25 2 30 2 50 2.5 60 3 75 3.75 Available Impedance Values (10% ) 100 50, 100, 200 50, 100, 200 50, 100, 200, 300 50, 100, 200, 300, 500 50, 100, 200, 300, 500 50, 100, 200, 300, 500 50, 100, 200, 300, 500 50, 100, 200, 300, 500 50, 100, 200, 300, 500 50, 100, 200, 300, 500 50, 100, 200, 300, 500 100, 200, 300, 500 100, 200, 300, 500 300, 500 300, 500
P/N DESIGNATION:
SP10
- 10NS - 101 B W
RCD Type Options: as assigned by RCD (leave blank if std.) Total Delay Impedance in 3 digit code: 50R=50, 101=100, 201=200, 301=300, 501=500, Packaging: B=Bulk Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
TEST CONDITIONS @25C 1.) Input test pulse shall have a pulse amplitude of 2.5 volts, rise time of 2nS, and pulse width of 5X total delay. 2.) Delay line to be terminated to within 1% of its charac teristic impedance. 3.) Delay time measured from 50% of input pulse to 50% of output pulse on leading edge with no loads on output. 4.) Rise time measured from 10% to 90% of output pulse.
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
FA106 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
1 12

▲Up To Search▲

Price & Availability of SP10-10NS-301B

	To Download SP10-10NS-301B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .